|
| |
 |
The Premotec
permanent magnet stepper and synchronous motors combine
high energy magnets in a cost effective "claw pole"
design to give low operating temperature and a superior
torque to size ratio. For the steppers, torques from 10
to 75 mNm and speeds from 300 to 1000 rpm are available,
with a step angle of 7.5 degrees. All our steppers are
available with unipolar or bipolar drive electronics.
Rated torques for the synchronous motors run from 4 up
to 33 mNm with a speed of 250 and 500 rpm (based on 50
Hz). Below is a list of our synchronous and stepper motor
program. |
| |
|
| |
|
|
|
 |
Output Power: |
3.5 Watt |
| Nominal Voltage: |
5 Volt |
| Nominal Torque up to: |
45 mNm |
| Nominal Speed up to: |
7500 rpm |
| Pull-in rate: |
620 steps/s |
| Step angle: |
7.5 º |
| Drive electronics: |
Bipolar |
| Diameter: |
51.0 mm |
| Length: |
28.0 mm |
| Compatible gearboxes: |
S52A,
S70A, S70B |
| Download
full specifications of this motor |
|
|
|
|
|
Output Power: |
3.8 Watt |
| Nominal Voltage: |
5 and 12 Volt |
| Nominal Torque up to: |
33 mNm |
| Nominal Speed up to: |
800 rpm |
| Pull-in rate: |
450 steps/s |
| Step angle: |
7.5 º |
| Drive electronics: |
Unipolar |
| Diameter: |
51.0 mm |
| Length: |
28.0 mm |
| Compatible gearboxes: |
S52A,
S70A, S70B |
| Download
full specifications of this motor |
|
|
|
|
 |
Output Power: |
2.0 Watt |
| Nominal Voltage: |
5 Volt |
| Nominal Torque up to: |
8.5 mNm |
| Nominal Speed up to: |
3000 rpm |
| Pull-in rate: |
800 steps/s |
| Step angle: |
7.5 º |
| Drive electronics: |
Bipolar |
| Diameter: |
35.0 mm |
| Length: |
22.0 mm |
| Compatible gearboxes: |
S52A,
S70A |
| Download
full specifications of this motor |
|
|
|
|
|
Output Power: |
2.0 Watt |
| Nominal Voltage: |
5 and 12 Volt |
| Nominal Torque up to: |
7.5 mNm |
| Nominal Speed up to: |
1000 rpm |
| Pull-in rate: |
500 steps/s |
| Step angle: |
7.5 º |
| Drive electronics: |
Unipolar |
| Diameter: |
35.0 mm |
| Length: |
22.0 mm |
| Compatible gearboxes: |
S52A,
S70A |
| Download
full specifications of this motor |
|
|
|
|
 |
Output Power: |
5.0 Watt |
| Nominal Voltage: |
5 Volt |
| Nominal Torque up to: |
95 mNm |
| Nominal Speed up to: |
1300 rpm |
| Pull-in rate: |
570 steps/s |
| Step angle: |
7.5 º |
| Drive electronics: |
Bipolar |
| Diameter: |
57.0 mm |
| Length: |
38.0 mm |
| Compatible gearboxes: |
S70A,
S70B |
| Download
full specifications of this motor |
|
|
|
|
|
Output Power: |
5.0 Watt |
| Nominal Voltage: |
5 and 12 Volt |
| Nominal Torque up to: |
80 mNm |
| Nominal Speed up to: |
450 rpm |
| Pull-in rate: |
300 steps/s |
| Step angle: |
7.5 º |
| Drive electronics: |
Unipolar |
| Diameter: |
57.0 mm |
| Length: |
38.0 mm |
| Compatible gearboxes: |
S70A,
S70B |
| Download
full specifications of this motor |
|
|
|
|
|
Output Power: |
5.0 Watt |
| Nominal Voltage: |
5 Volt |
| Nominal Torque up to: |
48 mNm |
| Nominal Speed up to: |
750 rpm |
| Pull-in rate: |
220 steps/s |
| Step angle: |
15 º |
| Drive electronics: |
Bipolar |
| Diameter: |
57.0 mm |
| Length: |
38.0 mm |
| Compatible gearboxes: |
S70A,
S70B |
| Download
full specifications of this motor |
|
|
|
|
|
Output Power: |
5.0 Watt |
| Nominal Voltage: |
5 and 12 Volt |
| Nominal Torque up to: |
37 mNm |
| Nominal Speed up to: |
900 rpm |
| Pull-in rate: |
200 steps/s |
| Step angle: |
15 º |
| Drive electronics: |
Unipolar |
| Diameter: |
57.0 mm |
| Length: |
38.0 mm |
| Compatible gearboxes: |
S70A,
S70B |
| Download
full specifications of this motor |
|
|
|
|
 |
Output Power: |
3.5 Watt |
| Nominal Voltage: |
24 to 220 Volt |
| Nominal Torque up to: |
20 mNm |
| Nominal Speed up to: |
250 / 300 rpm |
| Frequency: |
50 Hz / 60 Hz |
| Diameter: |
51.0 mm |
| Length: |
28.0 mm |
| Compatible gearboxes: |
S52A,
S70A, S70B |
| Download
full specifications of this motor |
|
|
|
|
 |
Output Power: |
0.8 to
1.7 Watt |
| Nominal Voltage: |
24 to 117 Volt |
| Nominal Torque up to: |
7 mNm |
| Nominal Speed up to: |
250 / 300 rpm |
| Frequency: |
50 Hz / 60 Hz |
| Diameter: |
35.0 mm |
| Length: |
22.0 mm |
| Compatible gearboxes: |
S52A,
S70A |
| Download
full specifications of this motor |
|
|
|
|
 |
Output Power: |
3.5 Watt |
| Nominal Voltage: |
24 to 220 Volt |
| Nominal Torque up to: |
33 mNm |
| Nominal Speed up to: |
250 / 300 rpm |
| Frequency: |
50 Hz / 60 Hz |
| Diameter: |
57.0 mm |
| Length: |
38.0 mm |
| Compatible gearboxes: |
S70A
, S70B |
| Download
full specifications of this motor |
|
|
|
|
|
Output Power: |
6.0 Watt |
| Nominal Voltage: |
24 to 220 Volt |
| Nominal Torque up to: |
33 mNm |
| Nominal Speed up to: |
5000 / 600 rpm |
| Frequency: |
50 Hz / 60 Hz |
| Diameter: |
57.0 mm |
| Length: |
38.0 mm |
| Compatible gearboxes: |
S70A
, S70B |
| Download
full specifications of this motor |
|
| |
|
|
